Pacific Living PL8430SSBG070 User Manual (English)

Other manuals for Pacific Living PL8430SSBG070

Questions and Answers:

E
Edward FreyJul 30, 2025
How to fix a grill that will not light on my Pacific Living Kitchen Appliances?
- T
  taylorsueJul 30, 2025
  If your Pacific Living Kitchen Appliance grill won't light, here are a few things to check: * Ensure the ignition wire is connected to the electrical igniter/valve. Reconnect if necessary. * Adjust the distance between the ignition pin and the burner to 3~5 mm, then fasten it. * Try installing a new AA battery, ensuring correct polarity. * Make sure the electrode is producing sparks at the burner port by reinstalling it. * Confirm that the regulator valve is turned on to supply gas. * Adjust the air shutter opening to a smaller size. If these steps don't work, the ignition wire may be broken, and you should call customer service for a replacement.
R
Rachel HallAug 3, 2025
Why is the burner flame yellow and I smell gas on my Pacific Living Kitchen Appliances?
- A
  Anthony HebertAug 3, 2025
  If the burner flame on your Pacific Living Kitchen Appliance is yellow and you smell gas, the air shutter opening may not be properly set or spiders/insects may be blocking it. Adjust the air shutter to achieve blue flames, using a 1/4 inch opening for LPG or 1/8 inch (or less) for NG. Also, check for and clean any blockages in the air shutter. In addition, check for the source of any possible gas leaks.
D
David YoderAug 7, 2025
What to do if my Pacific Living Kitchen Appliances has excessive flare-up?
- A
  April StewartAug 7, 2025
  Excessive flare-ups on your Pacific Living Kitchen Appliance can occur when grilling fatty meats. If this happens, move the meats to the warming rack until the flames settle. Also, ensure the knobs are not set to “HIGH”; grill fatty meats on the “LP LOW” (for LP Gas) or “NG LOW” (for Natural Gas) setting with cold grids. Never spray water on gas flames, and keep the hood up while grilling.
M
montgomeryjosephAug 11, 2025
What to do if burner blows out on my Pacific Living Kitchen Appliances?
- G
  George WilkinsAug 11, 2025
  If the burner on your Pacific Living Kitchen Appliance blows out, first check if the LP tank is empty and refill it if needed. Next, ensure the burner is correctly aligned with the control valve by reinstalling it. Also, verify that the gas supply is sufficient by checking the gas supply hose for leaks or knots.
S
Sharon MasseyAug 16, 2025
Why is the heat low even with the knob in 'HIGH' position on my Pacific Living Kitchen Appliances?
- J
  Joseph CruzAug 16, 2025
  If you're experiencing low heat with the knob in the “HIGH” position on your Pacific Living Kitchen Appliance, and you have a natural gas model, ensure your natural gas supply system has the correct gas pressure for 7-inch natural gas usage. Also, check for and clear any obstructions in the ports. If you're using an LP tank, it may have run out, so refill it.
C
campospatrickAug 20, 2025
How to fix low heat with LP gas on my Pacific Living Kitchen Appliances?
- L
  lauren71Aug 20, 2025
  If you are experiencing low heat with LP gas on your Pacific Living Kitchen Appliance, the propane regulator assembly may have an excess flow device triggered by rapid changes in pressure. To resolve this, make sure all burners are off, open the tank valve and wait 5 minutes, then light the burners one at a time following the lighting instructions.