Pacific Sun Kore 7th User Manual (English)

Other manuals for Pacific Sun Kore 7th

Questions and Answers:

M
Mary WiseAug 1, 2025
How to improve the accuracy of Pacific Sun Laboratory Equipment?
- C
  Charles CurtisAug 1, 2025
  To improve the accuracy of your Pacific Sun Laboratory Equipment, ensure the following: * Pump #1 and pump #2 are correctly calibrated and free of long air gaps in the silicone tubing. Note that small air bubbles are acceptable. * The magnetic stirring bar/pellet is inside the kHLab cylindrical test chamber, as instructed. * Silicone tubing supplying reagent and test water are fully submerged below the liquid levels. * The green tip under the kHLab module chamber cover remains submerged during alkalinity tests. If you've recently replaced the dosing pumps PharMed tubing, allow a few days for the device to stabilize before recalibrating, unless the new tubing has a different diameter or nominal flow than the original Pacific Sun tubing.
D
dochoaAug 5, 2025
What to do if Pacific Sun Laboratory Equipment alkalinity results vary widely?
- D
  Devin CampbellAug 5, 2025
  If you are experiencing widely varying measured alkalinity results with your Pacific Sun Laboratory Equipment, the pump heads rollers might be dirty. Check the pump heads rollers for any black buildup, dust, or lubricant/grease. If the rollers are dirty, remove the dosing pump head and clean the rollers using a fresh paper towel and alcohol or a different solvent solution.
K
Kathleen FarmerAug 9, 2025
Why is the magnetic stirrer bar/pellet not spinning in my Pacific Sun Laboratory Equipment?
- M
  Maurice SmithAug 10, 2025
  If the water mixing magnetic stirrer bar/pellet in your Pacific Sun Laboratory Equipment is not spinning, increase the “Stirrer speed” in the Cloud Application under the "KH Lab Settings". The default is 100, try increasing it to 150 or higher. If the water mixing magnetic stirrer bar/pellet is spinning too fast, decrease the “Stirrer speed”.
M
Mr. Joseph Miller Jr.Aug 18, 2025
What to do if Pacific Sun Kore 7th Measuring Instruments alkalinity results vary widely?
- A
  alexandriabernardAug 18, 2025
  If you're experiencing inconsistent alkalinity readings with your Pacific Sun Measuring Instruments, the pump heads rollers might be dirty. Check for any black buildup, dust, or lubricant/grease on the rollers. If they're dirty, remove the dosing pump head and clean the rollers thoroughly.

Pacific Sun Kore 7th Specifications

General

Brand	Pacific Sun
Model	Kore 7th
Category	Measuring Instruments
Language	English

Pacific Sun Kore 7th Network Setup

Other manuals for Pacific Sun Kore 7th

Questions and Answers:

Pacific Sun Kore 7th Specifications