Need help?Do you have a question about the Pacific AMX series and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Output Frequency | 50/60 Hz |
| Input Voltage | 120V |
| Output Voltage | 120V |
| Current Rating | 20A |
| Operating Temperature | 50°C |
| Humidity Range | 95% |
| Amps | 20A |
| Voltage | 120V |
| Connectors | NEMA 5-20 |
| Number of Phases | Single Phase |
Details critical safety warnings and essential precautions required for operating the AC power source.
Covers input power requirements, output power, and other electrical performance characteristics.
Procedures for setting the desired output voltage range via jumpers and configuration switches.
Instructions for safely connecting the AC power source to the main input power.
How to connect the load to the power source output terminals for various phase configurations.
Step-by-step guide for powering on the unit for the first time and initial setup.
Conditions causing system shutdown and procedures for resetting faults and restarting.
Detailed steps for calibrating the controller and performing load tests on the power source.
To Next Page
