Pacific S Series User Manual

This operator’s book has important information for the use and safe operation of this machine. Read this book carefully before
starting the machine. Keep this book near the machine, protected from liquids and other substances that can cause damage to it.
If you do not follow the instructions, you can cause an injury or damage equipment, furniture or buildings.
For new books, please download your copy from our website www.pacicoorcare.com or write to:
Pacic Floorcare
®
2259 S. Sheridan Drive
Muskegon, MI 49442-6252
Carefully inspect all components to ensure that there is no concealed freight damage. If such damage is discovered, le a
“CONCEALED DAMAGE REPORT” immediately with the delivering carrier.
The contents of this manual are based on the latest product information available at the time of publication. Pacic Floorcare
reserves the right to make changes or improvements without being obliged to apply changes to the machines previously sold.
Thank you for purchasing a Pacic Floorcare product. Warranty registration will allow us to better serve you over the lifetime of
the product. For quick and easy registration, go to: www.pacicoorcare.com/Register Product.
PLEASE READ THIS BOOK
S-SERIES, 22-GALLON MID-SIZE
AUTO SCRUBBERS
PARTS & OPERATING MANUAL

Pacific S Series Specifications

General

Brand	Pacific
Model	S Series
Category	Scrubber
Language	English

Summary

SAFETY PRECAUTIONS

General Safety Precautions

Overview of hazards and safe operating practices, including warnings and cautions.

MACHINE PREPARATION

Unpacking and Battery Installation

Steps for removing the machine from packaging and installing batteries.

Using Your On-Board Charger

Instructions for charging the batteries using the machine's on-board charger.

Using Your Off-Board Charger

Attaching Cleaning Pads (Disk Head)

Attaching Pads to Orbital Head

MACHINE OPERATION

Operational Controls Overview

Introduction to the machine's controls, designed for ease of use and operator efficiency.

Turning Unit On/Off & Setting Flow Rate

How to power the machine on/off and adjust the desired solution flow rate.

On-Board Chemical Injection System

Setup and operation of the optional onboard chemical injection system for automated mixing.

Lowering Scrub Deck

Activating the Scrubber

MAINTENANCE

Maintenance Schedule

A schedule detailing required maintenance tasks based on frequency and operating hours.

End of Shift: Recovery Tank Care

End of Shift: Squeegee Assembly

End of Shift: Battery Maintenance

Guidelines for maintaining wet, lead acid batteries and using the HydroLink system.

PERIODIC MAINTENANCE

TROUBLESHOOTING

Operator Top Five Troubleshooting Issues

Common problems and solutions, including water pickup and run time issues.

Troubleshooting Guide (Table)

A detailed table listing issues, potential causes, and proposed solutions for various problems.

Transaxle Drive Units: Battery Fault Codes