Need help?Do you have a question about the Pacific Solana and is the answer not in the manual?
Weight and Dimensions| shipping weight | 45 kg |
|---|---|
| length | 142 cm |
| height | 79 cm |
| width | 91 cm |
Guidance on safe practices and recommendations for assembling fitness equipment, emphasizing professional assistance and careful step-following.
Instructions for seeking professional service or repair for the equipment, including contact information and warranty details.
Instructions for carefully unpacking the leg press option, checking for missing parts, and preparing the assembly area.
Lists the necessary tools required for assembling the leg press option, such as wrenches, pliers, and measuring tape.
Details essential conditions for setup, including warranty card completion, surface stability, adequate space, and bolt insertion.
Provides helpful advice for assembly, including using the provided scale for bolt measurement and reading all cautions.
Connects the Leg Press base and support arm to the main base of the Solana unit using specified bolts and washers.
Secures the seat frame, seat bracket support, and footrest to the leg press base and support arm using various hardware.
Attaches the backpad and seat pad to the seat bracket support and seat frame, ensuring correct orientation and alignment.
Mounts pulleys, spacers, retainers, and stop brackets onto the pulley plate and support arm using specified bolts and nuts.
Guides the cable through the pulleys on the pulley plate and support arm, ensuring proper alignment and free movement.
Adjusts cable tension by rotating the bumper pad against the press arm, ensuring proper weight stack engagement and resistance.
Fine-tunes cable tension by rotating the rubber bumper on the support arm against the stop bracket to eliminate slack.
To Next Page
