AttacAttac
AttacAttac
Attac
h the Hose Assembh the Hose Assemb
h the Hose Assembh the Hose Assemb
h the Hose Assemb
ll
ll
l
yy
yy
y
Attach the gray hose to the faucet
and check for leaks.
Secure clear drain hose in sink,
floor drain or commode.
Plug electrical cable into
grounded outlet.
These valves are truned to OFF.
Turn all valves ON to begin cleaning.
Do a Do a
Do a Do a
Do a
TT
TT
T
est Pull with the Macest Pull with the Mac
est Pull with the Macest Pull with the Mac
est Pull with the Mac
hinehine
hinehine
hine
Test clean an area using no chemicals. If
there is cleaner residual in the carpet from
previous cleaning no pretreating will be
necessary. However, defoam liquid may
be needed if too much residue cleaner is
in the carpet. Watch the see through cover
on the front of the machine and you will be
able to tell if over foaming is going to be a
problem. If you note excess foam or the
vacuum motor sounds like it is slowing
down you should depress the Defoam but-
ton on the machine control panel. This al-
lows defoam liquid to be pulled into the re-
covery tank. If the carpet seems to be clear
of cleaner residual, you may pretreat the
area as needed.
Pacific Floor Machine Co. Page 5
To Next Page
Loading...
