8
Adjusting tension on the foot pedal:
You will need a 9/64 size hex head Allen wrench
• Turn Off and unplug your wheel before beginning. ( Figure 1)
• Turn pedal upside down, locate the 2 pedal adjustment screws as shown. (Figure 2)
• To tighten the tension, turn both screws clockwise in small increments until you have the
tension you desire. (Figure 3)
• To loosen, turn both screws counterclockwise in small increments until you have the tension
you desire. (Figure 4)
Figure 1 Figure 2
Figure 3 Figure 4
To Next Page
Loading...
