9
Detaching and removing the control box unit:
CAUTION DO NOT OPEN THE CONTROL BOX COVER; THIS WILL VOID YOUR WARRANTY!!
At some point you may find it necessary to remove the control box or pedal for repair or replacement.
For ease of removal, Laguna has mounted the control box on a bracket independent from the wheel
frame. To remove the control box, follow the steps outlined below:
• Turn OFF and unplug your wheel before beginning.
• Unplug the cord to the motor.
• Using a 7/16 size wrench, remove the bolt at the top of the control box and remove the whole
box. DO NOT OPEN THE CONTROL BOX. The control box with the foot pedal can now be sent in
for inspection and/or repair independent from the Pacifica wheel itself.
To Next Page
Loading...
