Coco user guide
June 26, 2018
Introduction
Unpack the Coco from its packaging and
make sure all the parts are there. Inspect
the device visually for any damage.
The package contains:
• Coco tracking device
The optional accessories may include:
• Mounting screws
• User guide
• USB cable
The Coco comes fully charged and ready
to use so charging is not required.
The LED status indicator blinks when the Coco is communicating with PackAware.
Starting up the Coco
Follow these steps to start up the Coco. Once started up, the Coco will collect data and
communicate with PackAware automatically once an hour.
1. Turn power switch to on position.
2. Blinking led indicator confirms that the device has started.
Mounting the Coco to the package
1. Use 4x45mm screws or other reliable fastener to mount the Coco to the package firmly. Coco
should be installed inside the package.
To Next Page
Need help?
General
