Need help?Do you have a question about the PacketLight Networks PL-1000RO 3.3 and is the answer not in the manual?
Provides an overview of the PL-1000RO, its ROADM functionality, and WSS technology.
Lists the key functionalities of the PL-1000RO, including flexible wavelengths, VOA, channel support, and management ports.
Describes how the PL-1000RO can be managed and used to expand fiber capacity and build scalable networks.
Details the available configurations of the PL-1000RO, focusing on MUX/DEMUX module presence.
Lists the general and WSS technical specifications for the PL-1000RO device.
Covers essential safety measures for installing and operating the PL-1000RO unit.
Details electrical safety warnings, grounding procedures, and laser safety classifications for the PL-1000RO.
Provides instructions on how to install the PL-1000RO unit, including package contents and cabling.
Guides on connecting various cables, including optical cable handling and management port cabling.
Instructions for connecting and configuring the terminal and turning on the PL-1000RO unit.
Details the process of initial IP configuration using CLI or Web browser.
Explains the prerequisites and steps for accessing the PL-1000RO's web-based user interface.
Describes how to navigate the web application using item buttons, sidebar buttons, and tabs.
Defines the different user types (Administrator, Read/Write, Read Only) and their permissions.
Explains local and remote authentication methods for accessing the PL-1000RO.
Covers security settings, including Users and Radius tabs for managing user accounts and authentication.
Details how administrators can manage local user accounts, add, modify, or delete users.
Explains how non-administrator users can change their own passwords.
Guides administrators on configuring the Radius client for centralized authentication.
Introduces fault views, including Alarms, Events, and Configuration Changes.
Outlines the general procedure for viewing faults across different modules like System, WSS, MNG, Ethernet, EDFA, and PSU.
Details how to view system fault alarms, events, and configuration changes.
Provides a consolidated view of all faults, including alarms, events, and configuration changes.
Focuses on viewing faults related to the WSS module, including alarms, events, and configuration changes.
Covers fault management for management ports, detailing alarms, events, and configuration changes.
Details fault management specific to Ethernet ports, including alarms, events, and configuration changes.
Explains fault management for EDFA modules, covering alarms, events, and configuration changes.
Describes fault management for Power Supply Units (PSU), including alarms, events, and configuration changes.
Lists various configuration operations for System, WSS Module, MNG Port, Ethernet Port, MUX/DEMUX, EDFA, PSU, and FAN Unit.
Outlines the general steps for viewing and configuring the PL-1000RO, navigating through System, WSS, MNG, Ethernet, MUX, EDFA, PSU, and FAN configurations.
Details how to configure general system parameters, view inventory, manage licenses, time, IP, SNMP, and Syslog settings.
Explains IP configuration, including LAN IP, subnet mask, gateway, OSC/In-band IP, and static routing.
Details WSS configuration, including general parameters and channel provisioning.
Covers configuration for management ports, including MNG, SFP, and ALS settings.
Explains how to configure Ethernet port status and parameters, including auto-negotiation.
Details how to configure EDFA modules, including mode, gain, and output power.
Provides information on viewing power supply unit (PSU) status and details.
Explains how to view FAN unit status and details.
Describes how to view optical performance of installed modules like MNG and EDFA.
Details how to monitor the performance of optical channels handled by the WSS module.
Explains how to view performance monitoring data for management ports.
Guides on viewing optical performance monitoring for EDFA modules.
Covers system maintenance tasks like restarting the unit, managing log files, and updating configurations/software.
Explains how to perform cold restart, warm restart, and restore to factory defaults.
Guides on downloading and switching software versions for the PL-1000RO.
Explains how to configure external alarm settings for monitoring.
Describes how to view the network topology and define multiple nodes as multi-chassis.
Explains how to zoom in/out and navigate the topology display for better visualization.
Guides on defining multiple PL-1000RO nodes at the same site as multi-chassis.
Illustrates setting up remote management for a point-to-point setup with management systems A and B.
Provides steps for setting up point-to-point remote management, including web access and configuration of nodes.
Details the IP address configuration for PL-1000RO A in a remote management setup.
Details IP address and static routing configuration for PL-1000RO B for remote management.
Explains how to access the web application of PL-1000RO A from management system A.
Describes the general features of the Command Line Interface (CLI), including authentication and command structure.
Explains how to access the CLI using a serial port, Telnet, or SSH.
Provides an overview of runnable CLI commands and their categories.
Covers commands for configuring interface settings, such as channels, EDFA, and MNG ports.
Details commands for configuring IP settings, including Ethernet IP, OSC IP, and network mode.
Describes the wiring of the 9-pin D-type female CONTROL connector for RS-232 communication.
Explains the RJ-45 connector for the 10/100 Base-T Ethernet interface.
Describes the power supply connectors for AC and DC powered PL-1000RO units.
Explains how to connect the protective ground terminal of the PL-1000RO to a protective ground.
Lists possible alarm messages from PSU, FAN, System, External Input, Optics, EDFA, and WSS, with interpretations and corrective measures.
Explains configuration event messages related to date changes, provisioning, IP changes, alarm cut-off, and user management.
Provides a chart of common trouble symptoms, probable causes, and corrective measures for PL-1000RO issues.
General| Model | PL-1000RO 3.3 |
|---|---|
| Manufacturer | PacketLight Networks |
| Management | SNMP, Web GUI, CLI |
| Humidity | 5% to 95% non-condensing |
| Form Factor | 1U |
| Wavelength Range | C-band |
| Max Distance | Up to 80km |
| Power Supply | Dual redundant AC or DC |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | 70°C |
To Next Page