8
Before First Use
Refer to the Cleaning & Maintenance
section of this manual. Clean the
appliance and attachments thoroughly
before irst use.
CAUTION:
1. To protect against risk of electrical
shock, DO NOT put the Blender
Base in water or other liquid.
2. The blades are very sharp. The
blade assembly is not removable.
HOW TO USE
1. Before assembling the blender,
ensure it is unplugged from the
power supply.
2. Place Blender Base on a lat, dry
surface such as a kitchen counter.
3. Attach the Blender Jar upright on
the Blender Base. The handle of the
Blender Jar can be positioned to any
corner of the appliance.
4. Add ingredients to Blender Jar as
directed by your recipe, ensuring
not to exceed the “MAX“ mark.
5. Place the Lid irmly into position on
the top of the Blender Jar.
6. Close the Lid and insert the
Measuring Cap into the Lid and
turn in either direction to lock into
position. You can use the Measuring
Cap to add ingredients while the
blender is running. Close the iller
hole immediately after, to avoid
splashing. Caution! NEVER operate
the blender empty. DO NOT blend
hot liquids.
7. Insert the power plug into a 120V
power supply outlet.
8. Press the Power Button. The LED
light will illuminate and Digital
Display Screen will be visible.
9. Pre-set Functions
a) There are 4 pre-set functions
including Smoothie, Crushed Ice,
Soup and the Self-Cleaning Cycle.
The digital display screen shows the
corresponding icon when each pre-
set is selected (as shown in Fig. 9a).
Smoothie: For making blended
drinks
Crushed Ice: Pulsing action crushes
cubes of ice
Soup: Purees, blends and heats
soup
Self-Cleaning Cycle: Run this cycle
with half a jar of water and a couple
Using Your Blender
Eortlessly blend, chop, puree and crush with your
Paderno
TM
High-Speed Blender.
Fig. 9a
TR1440980_F.indd 8 1/4/19 10:59 AM
To Next Page
Loading...