paice setter PS260S User Manual

Operator’s
manual
READ THESE INSTRUCTIONS
CAREFULLY BEFORE USE
Please also refer to engine manufacturer’s instructions.
Contact your dealer or manufacturer if you have a
question that is not answered in this manual.
OBSERVE SAFETY REGULATIONS
Keep this manual safe for future reference.
Brushcutter
PS260S
PS260W
PSX260S
PSX280W
PaiceSetter
TM

paice setter PS260S Specifications

General

Brand	paice setter
Model	PS260S
Category	Brush Cutter
Language	English

Summary

Safety Warnings and Definitions

Signal Words and Safety Instructions

Learn signal words like WARNING, CAUTION, and NOTE for safe operation.

Safety Rules and Precautions

Fuel Safety and Pre-operation Checks

Operational Safety Precautions

Cautions During Operation

Post-Operation Safety and Storage

Precautions After Operation

Preparing for Operation

Fuel and Oil Mixture

Instructions for preparing the correct fuel and oil mixture for 2-stroke engines.

Starting and Stopping the Engine

Engine Starting Procedure

Step-by-step guide on how to start the brushcutter engine safely.

Engine Stopping Procedure

Engine Operation Cautions and Stopping

Idle Speed and Engine Cautions

Proper Engine Stopping

Carburettor and Idle Speed Adjustment

Correct Handling of Machine

Machine Handling Techniques

Working Methods and Cutter Use

Nylon Cutter and Blade Usage

Working Methods: Kickback Prevention

Understanding Kickback

Explanation of kickback and when it is likely to occur.

Preventing Kickback Hazards

Strategies and areas to avoid to prevent kickback.

Regular Maintenance Chart

Regular Maintenance Notes and Procedures

Spark Plug Check and Cutter Selection

Rotary Cutter Selection and Use

Advice on choosing and using different types of rotary cutters safely.

Storage and Troubleshooting

Common Troubleshooting Issues

Solutions for common problems like starting issues or performance degradation.

Assembly of the Machine

Engine Installation and Throttle Wire Adjustment

Steps for installing the engine and adjusting the throttle wire.

Handle and Safety Guard Attachment

Attaching the Safety Guard

Cutter Installation

Blade Installation

Procedure for securely installing the cutting blade.

Nylon Cutter Installation

Steps for properly attaching the nylon cutting head.

Parts List

Limited Warranty

Warranty Period and Coverage

Details on the warranty period for the main pipe assembly and engine.

Warranty Exclusions

List of conditions and failures not covered by the product warranty.