Gel pads
Side A Side B
Electrode contacts
Preparing Aegis before use
Remote Control
1. Attach gel pads to the Aegis unit
Remove one gel pad from its packaging. Remove the coloured
protective plastic cover from side A of the gel pad.
Apply the gel pad to the Aegis unit as shown in the diagram.
Now remove side B from the gel pad. Retain this plastic cover as it
will be re-used after treatment it coplete.
Now repeat the above process with the second gel pad.
94
93
Function/Mode
Intensity
Increase Intensity button
Decrease intensity button
Countdown Timer
Function/Mode button
Power button
To Next Page
Loading...