DOG TRAINING COLLAR
User Guide
Tips
BEFORE USING THE DOG TRAINING COLLAR
WHEN USING THE DOG TRAINING COLLAR
PACKAGE CONTENTS
SPECIFICATIONS
MAINTENANCE
INTRODUCTION FOR THE BUTTONS
OPERATION AND CHARGING
How to choose USB Charger
Charge the Remote Transmitter
To Turn the Remote Transmitter On and Off
Charge the Receiver
To Turn the Receiver On and Off
Check the Receiver Power
How to Wear Receiver Collar Correctly
PAIRING AND TESTING
REFERENCE SIZE FOR DIFFERENT DOGS
FAQ
WARRANTY
STATEMENT
SAFETY INSTRUCTION
REINFORCE LEARNING BEHAVIOURS
CONTENTS
Thank you for purchasing the remote dog training collar PD 526,
this product has been tested to meet your stringent quality
standards, and also covered with warranty for 12 months from the
date of its original purchase.
Please contact us with your order ID and problem or issue, we will
respond within 24 hours.
This warranty is void if the defect is caused by accidental damage,
misuse, abuse, neglect, improper repair or alteration by
unauthorized persons, or a failure to follow operating instructions
provided with the product including adding essential oils directly
into the tank and base.
This warranty does not apply to normal wear and tear or
commercial use. In no event shall liability exceed the purchase
price paid by the purchaser of the product. Under no
circumstances shall there be liability for any loss-direct, indirect or
incidental-or consequential damage arising out of, or in
connection with the use of the product.
Training collars are used to train the dogs and not for
punishment. Use properly with care and the collar can be a
safe and effective tool to train. Building communication and
strengthen your bond with your best friend. Obey all safety
messages that follow this instruction to avoid possible
injury.
01
If your dog knows the command but responds inconsistently than
your requirement, a training collar can sharpen his skill.
For example, you have taught your dog to come when calling, but
over time he responds slower. You can communicate with him via
the remote transmitter, so that he immediately responds to your
call.
1. Set the collar to initial stimulation level and test it.
2. Fit the collar on your dog’s neck along with his regular collar.
3. Let him roam around the training area. Then give the command
and simultaneously press the stimulation button.
4. The instant your dog moves toward you, stop stimulation and
praise him.
5. If he stops before he reaches you or turns away repeat the
command and continue the stimulation. Again, stop at the instant
he runs to you and rewards him by praising him or feeding him a
treat. Repeat this for 3 or 4 times.
1. If he doesn’t get it for the first few times, don’t give up and do
not increase the stimulation. Try to work on this a few times.
2. During the training period never give the command if you are
not able to enforce it. Your dog has to make the mental
connection between the static shock/vibration/beep to his
behavior(may take a week or more for some dogs).
Altogether, both methods of stopping unwanted behavior and
reinforcing learning behaviors can be applied to nearly every
training scenario.
Tips
02
CH
SAFETY INSTRUCTION
STATEMENT REINFORCE LEARNING BEHAVIOURS
01
01
02
02
03
03
04
04
04
05
06
06
06
06
07
07
07-08
08-09
09
10-12
12
06-07
- PD 526 -
PaiPaitek
service20220613@gmail.com
To Next Page
Need help?
General
