PaiPaitek PD 258-V - User Manual

Need help?

Do you have a question about the PaiPaitek PD 258-V and is the answer not in the manual?

Summary

Device Operation

Turn On;Off

Instructions for switching the device on and off by pressing the switch.

Sensitivity Adjusting

Guide to adjusting the collar's sensitivity levels for optimal bark detection.

Usage and Training

Vibration Test

Procedure to test the collar's vibration function using sense hole.

Training Instructions

Steps for training dogs to respond to vibration warnings for barking.

Automatic Intelligence Mode

Explanation of the collar's automatic standby reset after periods of no barking.

Charging and Attention

Charging Information

Details on the product's cycle charging function and low battery indicators.

Attention

Important notes on using the correct USB charger parameters for safe charging.

Collar Fit

Guidelines for fitting the collar correctly on the dog for effective vibration.

Safety and Reminders

Safety Notes

Essential safety precautions regarding dog biting and product usage for dogs only.

Reminders

Important reminders about keeping the product away from water and initial training behavior.

This document describes the Vibration Anti-Bark Collar User Manual, Model Number: PD 258-V.

Function Description

The PD 258-V is a vibration-based anti-bark collar designed to help train dogs to stop excessive barking. It uses vibration as a deterrent, activating when it detects a dog's bark. The collar is designed to be humane, safe, and effective, utilizing vibration technology to warn the dog to stop barking. It incorporates an "Automatic Intelligence Mode" which resets the collar to an initial standby model after 30 seconds of the dog stopping barking, regardless of how many times it has activated. If the collar activates 7 times consecutively, the signal lamp will flash rapidly, and the collar will pause operation for 30 seconds before resetting to its initial standby mode. This feature aims to prevent over-stimulation and ensure the dog has time to process the training.

Important Technical Specifications

The device features cycle charging and energy-saving functions. For charging, it requires a USB charger with specific parameters:

Input: 100-240V~50/60HZ
Output: 5V 1000mA (or 300mA/500mA) The product is compatible with mobile chargers or computer USB interfaces, provided these parameters are met. The collar is made of indigestible plastic and electronic components, emphasizing the importance of preventing dogs from biting it.

Usage Features

Turning On/Off: The collar is turned on by pressing the switch and turned off by pressing the switch for one second.

Sensitivity Adjusting: The sensitivity of the collar can be adjusted to match the loudness of the dog's barking. There are 5 sensitivity levels, with the initial factory setting being level 3. Users can adjust the sensitivity using the "+/-" buttons, accompanied by a "bleep" sound. A higher sensitivity setting means the collar will be easier to activate.

Vibration Test: To test the vibration function, users can blow directly into the "sense hole" located in the middle of the collar or imitate barking loudly. This action should trigger the collar's vibration.

Training Instructions:

Initial Bark: As soon as the dog barks, the anti-bark collar will initiate a vibration to warn the dog to stop.
Continuous Barking: If the dog continues to bark, the collar will continuously vibrate for a longer duration after each bark until the dog ceases barking.
Learning Process: Through this training, the dog is expected to learn that its barking triggers the vibration.
Timeframe: It is noted that a certain period of time is required to observe good results from using this anti-bark collar.

Collar Fit: Proper fit is crucial for the collar's effectiveness. The collar should be placed below the dog's neck with approximately a finger's space between the collar and the neck. If the collar is too loose, the vibration effect will be significantly reduced. The nylon strap can be trimmed if it is too long. It is explicitly stated not to tie a leash to the collar strap.

Maintenance Features

Charging: The collar features a cycle charging function. A red light will twinkle while charging and will remain solid red (without twinkling) once fully charged. If the battery level becomes too low, the collar will automatically shut down, indicating that it needs to be charged promptly.

Safety Notes:

Prevent Biting: Dogs should be prevented from biting the collar due to its indigestible plastic and electronic components. If any parts are swallowed, immediate consultation with a local vet is advised.
Dog-Specific Use: The product is exclusively for dogs and should be kept away from children.
Water Exposure: The product should be kept away from water.

Reminders for Effective Use:

Initial Adjustment Period: A small number of dogs may continue to bark initially when wearing the collar. This is considered normal and typically requires some training time.
Continued Training: While dogs usually reduce barking significantly after the first few days, training is not complete, and smart dogs may still attempt to bark. Continuous training is necessary to maintain good results.
Distinguishing Barks: Although the collar is designed with advanced technology to differentiate dog barks from other environmental noises, it might occasionally be activated by a dog's excessive scratching or a strong external impact. If this occurs, it is recommended to consult a local vet, as the pet might be suffering from fleas or ear mites.
Support: For any further questions, users are encouraged to contact the manufacturer or distributors.

The manual also includes visual instructions for installing the nylon collar, demonstrating how to thread the strap through the buckle and adjust it, and how to trim any excess length.

PaiPaitek PD 258-V Specifications

General

Brand	PaiPaitek
Model	PD 258-V
Category	Pet Care Product
Language	English