Need help?Do you have a question about the Pakedge NK-1 and is the answer not in the manual?
Discusses the rise of IP networking for audio/video and control systems, highlighting latency challenges.
Provides contact information (email, phone) for Pakedge customer service and technical support.
Describes the function and status of the NK-1's front panel LEDs (HDD and PWR).
Details the rear panel ports (AC Connector, LAN, USB, Console) and their functions.
Lists the necessary tools and prerequisites for installing the wireless controller and APs.
Provides guidance on mounting the NK-1, whether in a rack or elsewhere, near power/network.
Outlines the steps to connect and configure the NK-1 using a network router's IP scheme.
Details the process for configuring the NK-1 directly via a computer connection and static IP.
Describes the visual arrangement of elements on the NK-1 Home screen interface.
Displays NK-1 uptime, MAC, IP address, and serial number at a glance.
Accesses cloud-based network management for monitoring and configuration.
Lists main sections: Dashboard, WiFi Setup, System Settings, Advanced.
Navigates to NK-1 device settings for configuration.
Explains the AP discovery phase of the setup wizard and its requirements.
Details wizard steps for configuring controller name, IP, gateway, and time zone.
Guides on changing the NK-1's login password and security questions.
Describes editing AP locations, viewing details, and selecting APs for firmware updates.
Explains how to select and update AP firmware.
Guides on setting up security profiles and SSIDs for wireless networks.
Describes how to complete the wizard and apply settings to access points.
Provides detailed NK-1 uptime, MAC, IP address, and serial number.
Facilitates cloud-based network management and device control.
Explains each component within the Wireless Controller interface.
Monitors AP CPU, memory, status, and connected clients.
Configures AP settings and system configurations.
Manages NK-1 settings and views AP license/firmware status.
Accesses AP deployment, scheduling, and site surveys.
Changes NK-1 setup, IP address, subnet mask, and login credentials.
Updates the NK-1's firmware.
Instructions on how to restart or power off the NK-1 device.
Steps to access the BakPak cloud-based network management system.
Guides on navigating to the WiFi settings within the Wireless Controller application.
Explains the Dashboard's display of AP CPU, memory, status, and client count.
Details the Hardware widget for monitoring CPU and memory usage over time.
Explains the AP Status widget and different AP status states.
Describes the Connected Clients widget for viewing and managing connected devices.
Guides on viewing connected WiFi devices, their status, and connection history.
Instructions on accessing and configuring settings for network access points.
Describes the list of connected access points, their details, and how to organize them.
Explains the 'Pakedge Default' and 'Access Points' groups for managing APs.
Provides steps to create new groups for applying different configurations to APs.
Guides on naming a group and selecting APs to add to it.
Explains how to change settings for AP groups via icons like BAND, IP, RESET, REBOOT, LED.
Describes how to edit AP group configurations or apply predefined ones.
Details how to change settings for individual APs using the three-dot menu.
Guides on viewing System Configurations and User Configurations for AP groups.
Steps to create new WiFi configurations, including SSID and security profile setup.
Explains how to create and manage SSIDs, including enable, hide, isolation, and security profile settings.
Guides on defining the SSID for the guest network.
Explains guest SSID setup, its independence from router settings, and isolation.
Describes how to change wireless mode and channel width settings.
Details setting up Radius security, noting its WX-1 environment limitation.
Guides on creating and using security profiles for SSIDs.
Explains how to save and apply WiFi configurations to AP groups.
Guides on changing the NK-1's network settings like IP, subnet mask, gateway, and time zone.
Details how to change the NK-1's password and security questions.
Covers rebooting, backing up, restoring, and resetting the NK-1 to factory defaults.
Guides on updating the NK-1's system firmware via upload or cloud update.
Instructions for updating NK-1 firmware using a local file.
Explains how to view and update NK-1 license information.
Guides on updating AP firmware from the cloud or via a local file upload.
Explains the AP deployment tool for planning WiFi coverage based on AP placement.
Guides on dragging and dropping APs onto the floorplan and using virtual APs.
Details how to change the power level for individual placed APs.
Explains how to switch the displayed WiFi coverage bands (5 GHz or 2.4 GHz).
Guides on creating schedules to enable or disable SSIDs based on day and time.
Explains how to block specific devices by MAC address from connecting.
Guides on running a site survey to scan AP frequencies and signal strengths.
Describes how to view and interpret site survey results, including graphs and tables.
Explains how to filter survey results by SSID, channel, or signal strength.
Details how to quickly view signal strength and channel for specific APs.
Guides on manually changing NK-1 network settings after the wizard.
Instructions for updating the NK-1's firmware through the Management Agent.
Discusses the rise of IP networking for audio/video and control systems, highlighting latency challenges.
Provides contact information (email, phone) for Pakedge customer service and technical support.
Describes the function and status of the NK-1's front panel LEDs (HDD and PWR).
Details the rear panel ports (AC Connector, LAN, USB, Console) and their functions.
Lists the necessary tools and prerequisites for installing the wireless controller and APs.
Provides guidance on mounting the NK-1, whether in a rack or elsewhere, near power/network.
Outlines the steps to connect and configure the NK-1 using a network router's IP scheme.
Details the process for configuring the NK-1 directly via a computer connection and static IP.
Describes the visual arrangement of elements on the NK-1 Home screen interface.
Displays NK-1 uptime, MAC, IP address, and serial number at a glance.
Accesses cloud-based network management for monitoring and configuration.
Lists main sections: Dashboard, WiFi Setup, System Settings, Advanced.
Navigates to NK-1 device settings for configuration.
Explains the AP discovery phase of the setup wizard and its requirements.
Details wizard steps for configuring controller name, IP, gateway, and time zone.
Guides on changing the NK-1's login password and security questions.
Describes editing AP locations, viewing details, and selecting APs for firmware updates.
Explains how to select and update AP firmware.
Guides on setting up security profiles and SSIDs for wireless networks.
Describes how to complete the wizard and apply settings to access points.
Provides detailed NK-1 uptime, MAC, IP address, and serial number.
Facilitates cloud-based network management and device control.
Explains each component within the Wireless Controller interface.
Monitors AP CPU, memory, status, and connected clients.
Configures AP settings and system configurations.
Manages NK-1 settings and views AP license/firmware status.
Accesses AP deployment, scheduling, and site surveys.
Changes NK-1 setup, IP address, subnet mask, and login credentials.
Updates the NK-1's firmware.
Instructions on how to restart or power off the NK-1 device.
Steps to access the BakPak cloud-based network management system.
Guides on navigating to the WiFi settings within the Wireless Controller application.
Explains the Dashboard's display of AP CPU, memory, status, and client count.
Details the Hardware widget for monitoring CPU and memory usage over time.
Explains the AP Status widget and different AP status states.
Describes the Connected Clients widget for viewing and managing connected devices.
Guides on viewing connected WiFi devices, their status, and connection history.
Instructions on accessing and configuring settings for network access points.
Describes the list of connected access points, their details, and how to organize them.
Explains the 'Pakedge Default' and 'Access Points' groups for managing APs.
Provides steps to create new groups for applying different configurations to APs.
Guides on naming a group and selecting APs to add to it.
Explains how to change settings for AP groups via icons like BAND, IP, RESET, REBOOT, LED.
Describes how to edit AP group configurations or apply predefined ones.
Details how to change settings for individual APs using the three-dot menu.
Guides on viewing System Configurations and User Configurations for AP groups.
Steps to create new WiFi configurations, including SSID and security profile setup.
Explains how to create and manage SSIDs, including enable, hide, isolation, and security profile settings.
Guides on defining the SSID for the guest network.
Explains guest SSID setup, its independence from router settings, and isolation.
Describes how to change wireless mode and channel width settings.
Details setting up Radius security, noting its WX-1 environment limitation.
Guides on creating and using security profiles for SSIDs.
Explains how to save and apply WiFi configurations to AP groups.
Guides on changing the NK-1's network settings like IP, subnet mask, gateway, and time zone.
Details how to change the NK-1's password and security questions.
Covers rebooting, backing up, restoring, and resetting the NK-1 to factory defaults.
Guides on updating the NK-1's system firmware via upload or cloud update.
Instructions for updating NK-1 firmware using a local file.
Explains how to view and update NK-1 license information.
Guides on updating AP firmware from the cloud or via a local file upload.
Explains the AP deployment tool for planning WiFi coverage based on AP placement.
Guides on dragging and dropping APs onto the floorplan and using virtual APs.
Details how to change the power level for individual placed APs.
Explains how to switch the displayed WiFi coverage bands (5 GHz or 2.4 GHz).
Guides on creating schedules to enable or disable SSIDs based on day and time.
Explains how to block specific devices by MAC address from connecting.
Guides on running a site survey to scan AP frequencies and signal strengths.
Describes how to view and interpret site survey results, including graphs and tables.
Explains how to filter survey results by SSID, channel, or signal strength.
Details how to quickly view signal strength and channel for specific APs.
Guides on manually changing NK-1 network settings after the wizard.
Instructions for updating the NK-1's firmware through the Management Agent.
General| Model | NK-1 |
|---|---|
| Type | Controller |
| Operating System | Linux |
| Network Interfaces | 10/100/1000 Mbps Ethernet |
| Serial Port | 1 |
| Power Input | 12V DC |
| Operating Temperature | 0 to 40 °C |
| Mounting | Rack-Mountable |
To Next Page
