paladin HARLEY POWER BOX RAKE T6

Questions and Answers

G
Gregory BallardAug 7, 2025
What to do if the hydraulic cylinder is inoperative on my paladin HARLEY POWER BOX RAKE T6?
- F
  fliAug 7, 2025
  If the hydraulic cylinder on your paladin Farm Equipment isn't working, start by checking the connections to ensure the hydraulic couplers are fully engaged. Also, make sure there's enough oil in the tractor's hydraulic system, referring to your tractor's manual for the correct fluid level. Air in the hydraulic system can also cause issues; try cycling the lever back and forth several times to remove any trapped air. Inspect the hoses for any signs of breakage that may cause leaks. Finally, verify the flow and pressure output of the tractor hydraulics, as a worn or inadequate hydraulic pump could be the cause.
M
mccallsaraAug 16, 2025
Why won't the roller turn on my paladin Farm Equipment?
- C
  Christina ThompsonAug 16, 2025
  If the roller on your paladin Farm Equipment won't turn, the first thing to check is whether the tractor PTO is engaged by checking the control lever. If that's not the issue, inspect the clutch friction discs for wear and replace them if necessary. Look for any obstructions between the roller and the barrier and clear them. A broken chain could also be the culprit, so replace it if needed. Lastly, check that the output shaft of the gearbox rotates, as the gearbox may be damaged.
J
Jennifer WigginsAug 26, 2025
How to troubleshoot oil leaks in paladin HARLEY POWER BOX RAKE T6 Farm Equipment?
- K
  kennethbryanAug 26, 2025
  If you notice oil leaks in your paladin Farm Equipment, it could be due to several reasons. Start by inspecting the seals for wear or damage and replace them if needed. Next, check the hoses and connections for any leaks, repairing or replacing them as necessary. Also, examine the housing for wear or damage, and replace it if required.

Summary

PREFACE

OWNER ASSISTANCE

SPECIFICATIONS

BOLT TORQUE CHART

SAFETY STATEMENTS

GENERAL SAFETY PRECAUTIONS

General safety rules for operating the equipment, including reading manuals and understanding hazards.

EQUIPMENT SAFETY PRECAUTIONS

EQUIPMENT SAFETY WARNINGS

Specific safety warnings related to operating hazards, hydraulic pressure, and modifications.

INITIAL SET-UP AND SYSTEMS CHECK

Critical checks before operating the equipment, including tractor ballast and hydraulic systems.

OPERATING SAFETY GUIDELINES

SAFELY OPERATE EQUIPMENT

Guidelines for safe operation of the power rake, including operator training and site awareness.

WATCH FOR OPERATING HAZARDS

Awareness of potential dangers during operation, such as terrain and obstructions.

MAINTENANCE SAFETY GUIDELINES

Safety precautions to follow during maintenance activities and electrical system work.

SAFETY DECAL AND SERIAL TAG PLACEMENT

OPERATIONAL PROCEDURE

ATTACHING POWER RAKE TO TRACTOR

Step-by-step guide for connecting the power rake to the tractor's hitch and PTO.

POWER RAKE FUNCTION AND ADJUSTMENTS

Explanation of the rake's function and how to adjust ground speed, rake angle, and roller.

OPERATING TECHNIQUES AND SETTINGS

Adjusting barrier gap, operating depth, and endplates for optimal raking performance.

APPLICATION TECHNIQUES

Different methods for using the rake for various tasks like pulverizing soil and debris removal.

THATCHING EXISTING GRASS AREAS

Specific procedure for using the rake for thatching, including depth control settings.

SHUTTING DOWN AND STORAGE GUIDELINES

Procedures for safely stopping the equipment and storing it properly.

REMOVING POWER RAKE FROM TRACTOR

Detailed steps for safely detaching the power rake from the tractor.

MAINTENANCE

PREVENTIVE MAINTENANCE SCHEDULE

Recommended maintenance tasks and intervals for ensuring equipment longevity and efficiency.

CHAIN AND DRIVE LINE MAINTENANCE

Maintenance procedures for the drive chain, PTO drive lines, and sprockets.

GEARBOX AND BEARING MAINTENANCE

Service recommendations for the gearbox and various bearings on the power rake.

CLUTCH MAINTENANCE AND REPAIR

CLUTCH RUN-IN PROCEDURE

Initial procedure for breaking in the clutch assembly before first use.

FRICTION DISC REPLACEMENT

Steps for replacing worn friction discs within the clutch assembly.

BEARING HOUSING AND ROLLER REPLACEMENT

TOP BEARING HOUSING SERVICE

Maintenance procedures for the bearing housing assembly due to failure.

LEFT ROLLER BEARING REPLACEMENT

Procedure for removing and replacing the left roller bearing.

RIGHT ROLLER BEARING REPLACEMENT

Procedure for removing and replacing the right roller bearing.

ROLLER REPLACEMENT PROCEDURE

Detailed steps for replacing the roller, including necessary lifting and support.

TROUBLESHOOTING GUIDE

ASSEMBLY AND SETUP

SET-UP INSTRUCTIONS

Initial instructions for assembling components and recommended torque values.

UNPACKING CRATE

Instructions for safely removing the equipment from its packaging.

STANDARD MODEL ASSEMBLY PROCEDURE

Step-by-step guide for assembling the standard model of the power rake.

PARTS LISTS

CRATE PARTS LIST

List of parts included in the shipping crate assembly.

GENERAL & FRAME PARTS LIST

List of parts for the general and frame assembly of the power rake.

ROLLER FRAME ASSEMBLY

Diagram and details for the roller frame assembly.

ROLLER FRAME PARTS LIST

List of parts specific to the roller frame assembly.

CLUTCH ASSEMBLY DIAGRAM

Exploded view diagram of the clutch assembly.

CLUTCH PARTS LIST

List of individual parts for the clutch assembly.

PTO DRIVELINE ASSEMBLY

Diagram and details for the PTO driveline assembly.

PTO DRIVELINE PARTS LIST

List of individual parts for the PTO driveline assembly.

GAUGE WHEEL ASSEMBLY

Diagram and details for the gauge wheel assembly.

GAUGE WHEEL PARTS LIST

List of individual parts for the gauge wheel assembly.

BEARING HOUSING ASSEMBLY

Diagram and details for the bearing housing assembly.

BEARING HOUSING PARTS LIST

List of individual parts for the bearing housing assembly.

GEARBOX ASSEMBLY

Diagram and details for the gearbox assembly.

GEARBOX PARTS LIST

List of individual parts for the gearbox assembly.

WARRANTY POLICY