Need help?Do you have a question about the Palas AGK 2000 and is the answer not in the manual?
This section explains the purpose and scope of the operating manual.
Identifies the intended users and their required qualifications for operating the device.
Confirms the manual's applicability to the AGK 2000 aerosol generator.
Provides guidance on keeping the manual accessible for future reference.
Details the formatting conventions used within the manual for clarity.
Covers general safety principles, hazard identification, and essential precautions.
Outlines critical steps to ensure the device is operated safely and correctly.
Specifies conditions and substances to avoid for safe and proper device application.
Details the importance and handling of safety stickers affixed to the device.
Defines acceptable environmental conditions for device operation and storage.
Warns about potential health risks from aerosols and recommends protective measures.
Explains the meaning of signal words and pictograms used to indicate hazards.
Notes the presence and location of warning stickers directly on the equipment.
Lists legal requirements and directives that must be observed.
Details the responsibilities users have to ensure safe and correct operation.
Describes the general purpose and application scope of the aerosol generator.
Specifies the proper applications and limitations for the AGK 2000.
Clarifies the manufacturer's non-liability for damages resulting from misuse.
Explains the operational principles and components of the AGK 2000 generator.
Provides an overview of the generator's physical configuration and connections.
Indicates the location and informational content of the device's type plate.
Lists the physical dimensions (height, width, diameter) of the aerosol generator.
Details all components and accessories included with the AGK 2000.
Specifies the temperature and humidity ranges for operation and storage.
Lists additional accessories that can be purchased for the AGK 2000.
Provides crucial instructions for safely unpacking and setting up the device.
Details the requirements and procedure for connecting the generator to a compressed air source.
Offers a concise, step-by-step guide for initial device setup.
Explains the correct method and precautions for filling the liquid reservoir.
Guides the user on connecting the generator's output for aerosol delivery.
Describes the process of generating aerosols and starting the device.
Details how to set nozzle pre-pressure and its effect on aerosol output.
Informs about suitable liquids and suspensions for aerosol generation.
Provides instructions for safely changing between different liquid substances.
Offers specific guidance and precautions for using KCl solutions.
Outlines the procedure for cleaning the entire aerosol generator unit.
Details how to disassemble and clean the cyclone component.
Specifies cleaning steps after using salt-based aerosol substances.
Describes maintenance tasks that must be performed by authorized service personnel.
Outlines routine maintenance activities to ensure optimal device performance.
Provides solutions for common issues related to nozzle clogging.
Guides on cleaning the generator to resolve issues caused by contamination.
Instructions for securely packaging the device for transport or return.
Recommendations for storing the device when not in use.
Safety advice for handling and moving the device.
Comprehensive guidelines for safe shipping and transportation practices.
Information on the proper disposal methods for packaging materials.
Guidance on the environmentally sound disposal of the generator and its components.
Lists the replacement parts that are available for the AGK 2000.
Presents a summary of the device's specifications and performance characteristics.
Lists relevant publications and standards referenced in the manual.
To Next Page
General