Palas AQ Guard User Manual

Aerosol Spectrometer
AQ Guard / AQ Guard Ambient
Operating Manual
For specialized users
6062-en_V2.4_02/21
V 2.4

Palas AQ Guard Specifications

General

Flow Rate	1.0 L/min
Power Supply	100-240 V AC, 50/60 Hz
Measurement Principle	Light scattering
Data Storage	Internal memory
Data Output	USB
Connectivity	Wi-Fi, USB, Ethernet
Light Source	Laser diode

Summary

Safety and User Guidance

Hazards and safety instructions

Details general hazards and safety precautions for device installation and operation.

LTE Dongle Safety Notes

Provides safety information regarding the LTE dongle's radio frequency emissions and usage.

Device Description and Setup

Device Setup and Commissioning

Guides users through the initial setup and configuration of the AQ Guard device.

Leakage Testing Procedure

Describes how to perform a leakage test on the device for proper functionality.

SIM Card Setup for Mobile Data

Operation and Connectivity

Checking Device Status

WiFi and Hotspot Connectivity

LAN Network Connection

Remote Desktop Firmware Access

Details how to operate the device's firmware remotely using a PC or mobile device.

Web Interface Data Access

Maintenance and Data Handling

Device Maintenance Procedures

Particle Size Calibration

Explains the process and requirements for calibrating the particle size measurement.

Volume Flow Rate Calibration

Details the procedure for calibrating the device's volume flow rate using an external meter.

Cleaning AQ Guard Sensor Optics

UDP ASCII Data Transfer

TCP ASCII Data Transfer