Palfinger CRANE RC 400 P2 User Manual

Confirms that these instructions are valid only with crane operating instructions and national regulations.

Ensures operator familiarity, training, availability of instructions, and authorized use of the system.

Specifies requirements for operating staff, referencing crane operating instructions.

Safety equipment must not be manipulated; tampering voids warranty and guarantee.

The remote control system must be operated exclusively with original Palfinger components.

Electronic components and batteries are special waste; dispose according to national laws.

Details the components, functions, and display possibilities of RC transmitters.

Lists and describes the functions of numbered components (1-20) on the RC transmitter.

Covers remaining components (20-28), speed control, radio quality, and emergency stop.

Illustrates different control lever arrangements for small and large transmitters.

Includes visual check of transmitter, ensuring proper battery, and availability of control cable.

Details moving lever to neutral, releasing emergency stop, and pressing the start button.

Instructs on activating the horn for danger zones and using the emergency off button for immediate stops.

Explains the meaning of LEDs for AOS, return oil utilization, and outrigger status.

Guides on using linear levers for outrigger extension and stabilizer ram control for different crane types.

Describes how to set the cable winch to working or transport position using specific switches.

Covers automatic switch-off conditions and changing radio channels for interference.

Details cable operation priority and connection requirements.

Provides guidance on charging and handling the remote control system's battery to maintain capacity.

Instructions for moving the crane to transport position and switching off the system.

Outlines safe steps for attaching and uncoupling loads, emphasizing emergency stop usage.

Emphasizes keeping the transmitter clean, avoiding high-pressure cleaning, and replacing damaged parts.

Instructs on storing the transmitter and key switch securely in the driver's cab, away from unauthorized access.