To Next PageTo Next PageWhat to do if my Pallmann GECKO STAR 2.0 Edger produces excessive dust while sanding?
If your Pallmann Edger produces excessive dust while sanding, first check if the dust bag is properly attached. If it is, the dust bag might be full; in that case, empty it.
Why my Pallmann GECKO STAR 2.0 machine does not start?
If your Pallmann Edger machine does not start, it could be due to several reasons: * The power supply might be interrupted. * The fuse could be defective. * The cord or plug might be defective. * Some parts might need replacement. * The brushes might be worn out or broken. In all these cases, you should have a qualified technician replace the faulty parts.
What to do if sanding is ineffective with my Pallmann GECKO STAR 2.0 Edger?
If the sanding with your Pallmann Edger is ineffective, it might be due to the sandpaper being worn out, so you should change it. Alternatively, the speed might be dropping, V-belt might need retightening, or the brushes might be worn out or broken. In these cases, have a qualified technician replace the faulty parts.
Outlines crucial safety instructions for all users.
Warns against using the machine for unintended purposes.
Stresses the importance of using genuine components for safety.
Covers checks and precautions before and during machine use.
Advises on appropriate workwear to prevent accidents.
Presents measured noise levels and hearing protection advice.
General