30 Treo 680
3. Select the same language you selected on your Treo 680, and then
follow the onscreen instructions.
4. When the install program asks you to sync, connect the USB sync cable
to a USB port on your computer and to the socket on the bottom of your
Treo 680.
5. Press the sync button.
Messages on both your computer and your Treo indicate that
synchronization is in progress. Do not disconnect the sync cable until you
see the message on your Treo saying that the HotSync
®
operation is done.
Next time you want to sync, just connect your Treo 680 to your computer
(using the sync cable) and then press the sync button.
Tip
Problems
synchronizing? See
"Synchronization
isn't working" on
page 43 for
troubleshooting
suggestions.
USB sync
cable
Sync button
To Next Page
Loading...
