Setting Up the Keyboard Page 7
4. Your next step depends on the kind of keyboard you are opening.
Keyboard for the Palm™ m500 series: While holding the
keyboard, slide the docking connector support bracket out until
the flat support springs upward.
Keyboard for the Palm III™ series, Palm VII™ series, and
Palm™ m100 series:
While holding the keyboard, slide the
docking connector support bracket out until the flat support
springs upward; then tilt up the docking connector.
Keyboard for the Palm V™ series: While holding the keyboard,
slide the docking connector support bracket out until it clicks; then
tilt it up and push the flat support outward.
To Next Page
Loading...
