Page 6 Palm™ Portable Keyboard Handbook
To install the keyboard application:
1. Insert the CD-ROM into the CD-ROM drive.
2. Follow the onscreen instructions to complete the installation.
Note: If installation does not begin, click the Windows Start
button, choose Run, enter D:\autorun.exe, and then click
OK. If necessary, replace D: with the drive letter assigned to
your CD-ROM drive.
Setting Up the Keyboard
Always use your keyboard on a hard, flat surface.
To open the keyboard:
1. Hold the keyboard in your hands and slide the latch down to open
the case.
2. Unfold the keyboard and place it on a hard, flat surface.
3. Grasp the two side-grips (with red borders) and slide them in
toward the keyboard’s center until the keyboard sections are
completely together.
To Next Page
Loading...
