140 :: Using expansion cards
Renaming an expansion card
If you change the contents of an expansion card, you may at some point want to
rename the card to better match its contents.
1. Insert the expansion card into the expansion card slot.
2. Select the category pick list at the top of the screen and select All.
3. Select Card Info .
4. Open the menus .
5. Select Rename Card on the Card menu.
6. Enter a new name for the card.
7. Se le ct O K.
Formatting an expansion card
Formatting an expansion card is similar to formatting a disk on a computer. When
you format an expansion card, you erase all the information stored on the card.
1. Insert the expansion card into the expansion card slot.
2. Select the category pick list at the top of the screen and select All.
3. Select Card Info .
4. Open the menus .
5. Select Format Card on the Card menu.
6. Enter a new name for the card.
7. Se le ct O K.
Before copying information
to, renaming, or formatting
an expansion card, make
sure the card is not write-
protected. See the
instructions that came with
your card for details.
CrowdyUG.book Page 140 Monday, August 1, 2005 3:58 PM
To Next Page
Loading...
