3. Tap the Device tab
4. Turn ON the Pocket Spectrum (if it is not already on) and tap New Partnership...
Wait until the M
obile Pocket Spectrum appears in the List (ie: MSP430026)
5. Select the Pocket Spectrum (i.e. MSP430026)
6. Tap Next
7. Enter Passkey 1000
8. Tap Next
9. Select Serial Port from the list of services
You can also change the display name.
In the example here it is renamed to Spectrum.
10. Tap Finish.
Your Pocket Spectrum is now parried with your device and called Spectrum.
Next you need to assign the Com port.
Pocket Verifier Addendum for TREO 700 4
To Next Page
Loading...
