27
5. Slowly pull back the cocking control.
You will hear a click, indicating that the
lancing device is now loaded and ready
to use.
Care of the lancing device
1. Clean the lancing device using a soft cloth
with mild soap and warm water as required.
Use 75% isopropyl alcohol to disinfect the
lancing device. Carefully dry it. Do not
immerse it in liquid.
2. To disinfect the lancing device cover, use a
disinfectant solution (containing 2000 mg/
dL of chlorine) and immerse for 30 minutes.
Finally, wash with water and wait until it
is dry.
04. Prepare for blood sampling
To Next Page
Loading...
