Need help?Do you have a question about the Palmer PDI03 JB and is the answer not in the manual?
General| Brand | Palmer |
|---|---|
| Model | PDI03 JB |
| Category | Music Equipment |
| Language | English |
Congratulations on your purchase of the Palmer PDI 03 Joe Bonamassa Signature Model Speaker Simulator DI Box.
Please read these instructions carefully, keep them in a safe place and follow them.
CAUTION: Connect only to a grounded outlet. Ensure power cord is not kinked or damaged.
CAUTION - HIGH VOLUME LEVELS WITH AUDIO PRODUCTS! Avoid prolonged exposure to volumes in excess of 90 dB.
Sets the attenuator level for amplifiers with different output wattages or for line level preamps.
Connect amplifier speaker output to INPUT and speaker/cabinet to THRU, use dummy load if needed.
XLR output provides a transformer balanced feed of the frequency compensated signal for DI.
Provides an unbalanced feed of the frequency compensated signal for further processing.
Deep-Normal-Flat and Bright-Normal-Mellow switches adjust low and mid/high frequencies.
Exclusive switch for the PDI 03 JB, adds a midrange bump for presence, focus, and cutting power.
Lists product type as Speaker Simulator and number of channels as 1.
Details input/output types, connectors, and impedance including transformer isolation.
Lists product controls and physical cabinet specifications like material and dimensions.
Details the 5-year warranty period, coverage, and transferability for original purchasers.
Outlines Adam Hall's liability limits for product failures, damages, and third-party claims.
Provides instructions on how to contact Adam Hall or authorized resellers for warranty service.
Instructions for environmentally friendly disposal of the product as electronic waste.
To Next Page
