Need help?Do you have a question about the Palmer PWT12MK2 and is the answer not in the manual?
General| Input Voltage | 100 - 240V AC |
|---|---|
| Output Voltage | 12V DC |
| Number of Outputs | 1 |
| Type | Linear |
| Polarity | Center positive |
| Transformer | Yes |
| Short Circuit Protection | Yes |
| LED Indicator | Yes |
| Frequency | 50/60Hz |
| Efficiency | 85% |
| Weight | 0.5 kg |
| Operating Temperature | 0°C to +40°C |
| Storage Temperature | -20°C to +70°C |
| Protection | Overload protection |
Comprehensive safety guidelines for equipment use, handling, and storage.
Ensures safe mains connection, grounding, and handling of power cords and adapters.
Warns about potential hearing damage from high sound pressure levels (SPL) and advises on safe listening.
Introduces the universal pedalboard power supply, highlighting its 12 outputs and 2000 mA capacity.
Explains how to connect the PWT 12 Mk 2 to AC and effect pedals, including voltage and polarity checks.
Details the input jack, DC outputs, status LEDs, and rotary voltage controls on the unit.
Lists detailed technical data including output voltage range, current capacity, and physical dimensions.
Outlines warranty conditions, liability limitations, and contact information for technical support.
Provides instructions for correct and environmentally friendly disposal of the product.
To Next Page
