Do you have a question about the Palo Alto PA-820 and is the answer not in the manual?
Verifies that products purchased from Palo Alto Networks were not tampered with during shipping.
Read the Palo Alto Networks Third-Party Component Support statement before installing third-party hardware.
Understand and prepare for warnings before installing or servicing hardware to avoid injury or damage.
Details the components on the front panel of the PA-800 Series firewall, including ports and indicators.
Describes the components on the back panel of the PA-820 and PA-850 Series firewalls.
Procedure for installing the PA-800 Series firewall in a two-post 19-inch equipment rack.
Procedure for installing the PA-800 Series firewall in a four-post 19-inch equipment rack.
Steps to connect AC power cords and ground the PA-800 Series firewall.
Explains the meaning of the status LEDs on the front and back panels of the PA-800 Series firewall.
Procedure for replacing a failed power supply on the PA-850 firewall without interruption.
Details the physical dimensions, rack units, and weight of the PA-800 Series firewalls.
Provides electrical specifications including power supplies, input voltage, and power consumption.
Lists environmental specifications such as operating temperature, humidity, airflow, and acoustic noise.
Covers miscellaneous specifications like storage capacity and Mean Time Between Failures (MTBF).
Provides the compliance statement for Voluntary Control Council for Interference by Information Technology Equipment (VCCI) in Japan.
User warning for Class A product regarding potential radio interference in residential environments.
| New Sessions per Second | 15, 000 |
|---|---|
| High Availability | Active/Passive, Active/Active |
| Maximum Number of Policies | 10, 000 |
| 10/100/1000 Ethernet Ports | 8 |
| Console Port | 1 |
| Management Port | 1 |
| Input Voltage | 100-240V AC |
| Form Factor | Desktop |
| Storage Temperature | -4° to 158° F (-20° to 70° C) |
| Virtual Systems (Base/Max) | 1/ |
| Interfaces | 8 x 10/100/1000 |
| Power Supply | Internal |
| Operating Temperature | 32° to 104° F (0° to 40° C) |
| Humidity | 5-90% non-condensing |