Frequency Response
Output Impédance
Output Indicators
400 Hz to 2.5 kHz - AM and SSB
50 Ohms, unbalanced
Meter shows relative RF output power,
Tx red lamp indicates transmit mode.
RECEIVER
Sensitivity - AM
Sensitivity - SSB
Selectivity
Image Rejection
Automatic Gain Control (AGC)
Squelch
Audio Frequency Response
Distortion
Adjacent Channel Rejection
Cross Modulation
IF Frequency
Clarifier
Noise Blanker
Audio Output Power
Built-in Speaker
External Speaker (optional)
,7^Vfor 10 db S/N
,25/iVfor 10 db S/N
6 db at 4.2 kHz
60 db at 7 kHz (AM and SSB)
More than 50 db
Change in audio output less than 10 db
from lOpV to .5 volts
Adjustable - threshold less than .5/aV
400Hz to 2.5 kHz
Less than 10% at 3.0 watts output
AM: -60 db, SSB: -65db
More than 55 db
AM and SSB, 7.8 MHz
±1 kHz
RF type, effective on AM and SSB
More than 3 watts into 8 ohms
8 ohms, dynamie
Disables internal speaker when connected
PUBLIC ADDRESS (PA) SYSTEM
Power Output : 3 watts into external speaker
External Speaker for PA (optional) : When PA switch is in PA mode, the unit
functions as a public address system.
To Next Page