Panacom HP-9686 - Safety Precautions; General Safety Guidelines; Installation Guide; Receiver Installation

Pg. 3
HP-9686 WIRELESS HEADPHONE
USER’S MANUAL
Thank you for purchasing Panacom’s Wireless Headphone HP-9686.
Please read the manual carefully before operating.
CAUTION
• Do not place product in moisture or hot environment.
• Avoid splashing water or impact on product.
• Overload operation will cause damage and shorten the life of the product.
• Turn off power source when product is not in use.
• Normally clean the headphone using a soft dry cloth. Always before clean-
ing, disconnect the power line and all connection cables.
INSTALLATION
Installing the Receiver:
Insert two AAA batteries into the battery compartment according to the
positive (+) and negative (-) polarity
Installing the Emitter:
Insert two AAA batteries into the battery compartment according to the
positive (+) and negative (-) polarity, or insert a power adaptor (not included)
into the power socket of emitter (4.5V DC)
Insert audio plug of the emitter into “Audio OUT” socket of the audio source selected.
Note: replace the batteries if the indicator becomes dim, the receiver reception is
poor or the volume become weak and the sound is distorted.