EasyManuals Logo

Panamax M4315-PRO User Manual

Panamax M4315-PRO
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Important: You will need the BlueBOLT-CV1’s unique MAC address and challenge key (provided on the 2 labels
attached to the cover of the Quick Start Guide which is included in the M4315-PRO packaging). One label is
permanently adhered to the Quick Start Guide and the other is removable for your convenience.
1 2 3 4 5 6 7 8
UNSAFE VOLTAGE
BREAKER
WIRING FAULT
TEMPERATURE
15 A
BRIGHTNESS
OUTLET STATUS
REBOOT 1 REBOOT 2
M4315-PRO
B
LT
Blue
ENABLED
VOLTS
Power Management with Control System Interactive Functionality.
• 15 Amp Capacity M4315-PRO
• 8 Individually Controllable Rear Panel Outlets
• Fully Programmable
• TCP/IP (BlueBOLT™) Installed
• RS-232 Card (Included, not installed)
• Linear Filtration with 3 Isolated LiFT Filter Banks, 76db (5 kHz - 250 kHz), 46 db (250 kHz - 1 MHz)
• One Isolated Filter Bank for High Current Devices, 60db (5 kHz - 450 kHz), 46 db (450 kHz - 1 MHz)
• Front Panel Circuit Breaker
• Integrated Front Rack Ears
• 12 Volt Input Triggering
• Detachable 10 ft. Power Cord
• AVM & Protect-or-Disconnect Circuitry
M4315-PRO Instructions
INS00859 REV. D 5/10
B
L T
Blue
ENABLED

Other manuals for Panamax M4315-PRO

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panamax M4315-PRO and is the answer not in the manual?

Panamax M4315-PRO Specifications

General IconGeneral
TypeSurge Protector
Outlets12
Coaxial ProtectionYes
Ethernet ProtectionYes
WarrantyLifetime
Protection ModesL-N, L-G, N-G
EMI/RFI Noise FiltrationYes
Voltage120V
Amperage15 Amps
Voltage Protection Rating330V
Response Time< 1 Nanosecond
USB Charging PortsNo
Cord Length8 feet

Related product manuals