EasyManua.ls Logo

Panasonic 800 Series

Panasonic 800 Series
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
Problem Possible cause Action
While using
The water jet is poor.
The nozzle is clogged. The outlet of the
nozzle is squashed. (See page 14.)
Replace the nozzle with a new one.
The lter is clogged.
Remove the dirt from the lter. (See page 14.)
No water comes out.
The main unit is tilted too much.
Please use the appliance with the main unit upright.
(See page 11.)
It may take some time to suck up water.
Put water into the nozzle port
a
,
install the nozzle, and turn on the
power switch.
b
a
The nozzle is hard to install.
Apply water to the nozzle insertion
port
b
.
Water leaks from the bottom
cover.
The rubber ring of the bottom cover is
cocked or misaligned.
Please install it properly. (See page 13.)
The appliance does not operate.
The battery has reached the end of its
life (approx. 3 years).
Replace it with a new one.
Please contact your dealer or Service Centre.
The appliance is used at approximately
5 °C or lower.
Do not use the appliance at approximately 5 °C or
lower.
If the problems still cannot be solved, contact the store where you purchased the unit or a service centre authorized by Panasonic for repair.
16

Related product manuals