19
THE PROBLEM
The video looks choppy.
THE SOLUTION
Rotate the SCENE FILE dial to
F1.
THE PROBLEM
I’ve followed all the instructions
in the Sound section, but I still
get nothing from my microphone.
THE SOLUTION
The microphone may require
phantom power to operate—set
the MIC POWER +48V switch to
ON for the microphone input.
PUSH HERE
PUSH HERE
THE SOLUTION
If you’re outdoors, set the ND
FILTER switch to either 1/4,
1/16 or 1/64.
HELP! CONTINUED
PUSH HERE
PUSH HERE
It’s still choppy!
THE PROBLEM
The video is STILL dark . . .
IT’S STILL TOO DARK!
THE SOLUTION
Press the SHUTTER button until
SHUTTER OFF displays in the
LCD monitor.
If you’re recording in low light,
set the GAIN switch to M (me-
dium) or H (high).
THE PROBLEM
The video is too bright.
The video’s still too bright . . .
My video is still too bright.
Set the AUTO MANUAL switch
to AUTO.
Set the GAIN switch to L (low).
Press the SHUTTER button until
SHUTTER OFF appears in the
LCD monitor.
To Next Page
Loading...
