Panasonic AJ-CVF50G - Visibility Adjustment; Screen Adjustment

Adjusting the viewnder
ENGLISH
E-11
Visibility adjustment
Visibility adjusting ring
1
Turn on the power of the camera.
Image is displayed in the viewnder.
2
Turn the visibility adjusting ring so the image in the viewfinder is clearly visible.
Screen adjustment
<PEAKING> dial
<CHROMA> dial
<CONTRAST> dial
<BRIGHT> dial
1
Turn on the power of the camera.
Image is displayed in the viewnder.
2
Set the <OUTPUT> selection switch of the camera to <BARS>.
3
Adjust the condition of the screen of the viewfinder.
f <PEAKING> dial: Contour
f <CHROMA> dial: Density of the color
f <CONTRAST> dial: Contrast
f <BRIGHT> dial: Brightness
@@
NOTE
t Focusing becomes easier by adjusting the contour and sharpening the image.
t Primary color (red, blue, green) may be visible when the line of sight is moved within the viewnder if the
viewnder is used in color mode. This is not a malfunction.