TVU Receiver configuration should be modified to receive Panasonic streaming.
This should be remotely done by TVU Support.
To start a live transmission, simply select the P2 device in the source list and press
the LIVE button. The stream will begin within a few seconds.
To stop a live transmission, press the STOP button
Please note, the TVU bitrate, latency (delay) and VBR/CBR functions do not affect
P2 transmission.
6. Configure TVU Receiver
Please consult TVU networks support about TVU Receiver configuration for
pairing between Panasonic camera/recorder and TVU Receiver.
http://www.tvunetworks.com/support/
TVU Support can also create a custom nickname for the camera
A P2 icon will appear on the TVU Receiver GUI once pairing is complete.
NOTE: P2 devices do not provide an index picture to the TVU GUI.
[ 5/6 ]
To Next Page
Loading...
