Need help?Do you have a question about the Panasonic Aquarea WH-MXC16J9E8 and is the answer not in the manual?
General| Type | Air-to-water heat pump |
|---|---|
| Series | Aquarea |
| Model | WH-MXC16J9E8 |
| Heating Capacity | 16 kW |
| Energy Efficiency Class (Heating) | A++ |
| Energy Efficiency Class (Cooling) | A+ |
| Refrigerant | R32 |
| Operating Temperature Range (Heating) | -20°C to 35°C |
Critical safety warnings regarding electrical hazards and health risks during installation and operation.
Important safety guidelines to prevent damage to the equipment and installation site.
Provides comprehensive details on product features and technical specifications.
Covers system operation, remote controller functions, and external interface connections.
Explains the design, functions, and models of the remote controller.
Guidance on calculating heat load based on design outside temperature.
Guidelines and requirements for the physical installation of the heat pump system.
Covers all electrical connection requirements, safety, and wiring.
Critical safety warnings and procedures for connecting to the power supply.
Essential safety precautions to be followed before and during the installation process.
Detailed steps for connecting the refrigerant pipes, including flare fitting requirements.
Instructions for connecting the water pipes for the heating system and drainage setup.
Steps for connecting water pipes to indoor or mono-bloc units, including torque specifications.
Comprehensive guide to electrical connections, including power and accessory wiring.
Covers the commissioning process, including refrigerant evacuation, filling, and testing.
Detailed procedure for safely evacuating and pressure testing the refrigerant circuit.
Instructions for filling and venting the hot water tank and heating/cooling circuits.
Steps for performing a test run to verify system functionality after installation.
To Next Page