Panasonic AVCCAM AG-HMC151E - Setting the DISPLAY Items

Displays
81
Setting the DISPLAY items
Display the following items on the viewfinder and LCD monitor by pressing the DISP/MODE CHK
button or by configuring OTHER DISPLAY of the DISPLAY SETUP screen of the setup menus. (Page 94)
Displays
MODE CHK
(Hold down DISP/
MODE CHK button)
DISPLAY
OTHER DISPLAY settings
ALL PARTIAL OFF
1 Time code display
—— — —
2 Media information display
———
3 Media capacity display
———
4 AUTO/MANUAL switch operation
display
x
5 Digital zoom ratio display
x
6 Recording format display
xx
7 System frequency display
xx
8 Information display — — — — —
9 EXPANDED display — — — — —
10 Microphone level automatic control
display
xx
12 Timestamp display
∗4
———
13 Date and time display
∗4
———
14 Frame rate display
∗1
xx
15 Shutter speed display
x
16 Audio level meter display
———
17 Auto iris control display
x
18 Iris display
x
19 Zoom position display
———
20 Focus control information display
———
22 ND filter display
xx
23 Gain display
∗2
x
24 AWB information display
∗3
x
25 Marker display — — — — —
26 Optical Image Stabilizer display
x
27 Scene filename display
xx
28 Remaining battery capacity display
———
30 Standby mode display — — — — —
32 Monitor audio level display — — — — —
: Displayed
x: Not displayed
—: Displayed depending on other settings
The item in
in the MODE CHECK space appears when you press and hold the DISP/MODE CHK
button.
The item in
in the DISPLAY space disappears when you press the DISP/MODE CHK button.
∗1
Not displayed when frame rate is set to 50i (or 60i when SYSTEM FREQ is set to 59.9 Hz).
∗2
0 dB is not displayed.
∗3
Only preset 3.2K and 5.6K are displayed.
∗4
If the timestamp display and the date and time display are both displayed simultaneously, they will not
disappear even if the DISP/MODE CHK button is pressed.