To Next PageTo Next Page
Need help?Do you have a question about the Panasonic Basic Series and is the answer not in the manual?
Covers warnings and cautions for user safety and product protection.
Details specific warnings and cautions for installation procedures.
Warnings about product falling, location, and gas hazards.
Cautions regarding installation personnel, components, and protective gear.
Lists accessories provided with the air curtain and their quantities.
Lists models with dimensions A and B.
Lists parts by name, number, and classification.
Details locations and conditions where installation is prohibited.
Provides guidelines on mounting height, spacing, and product orientation.
Steps for installing the mounting plate on different surfaces.
Steps for preparing the product before electrical wiring.
Detailed instructions and diagram for electrical wiring.
Steps for placing and fastening the main unit onto the mounting plate.
Instructions for installing the sensor and connecting it to the main body.
Guidelines for wiring multiple products in parallel.
Electrical wiring diagrams for different series.
Explains how to operate the control panel for basic and sensor series.
Details operation using the remote control for the remote control series.
Instructions on remote control usage and battery installation.
Explains how to adjust the guide vane for optimal separation performance.
Critical safety warnings before performing maintenance.
Lists actions to avoid during maintenance to prevent hazards.
Cautions for maintenance, including personnel, cleaning agents, and part disassembly.
Guidance for long-term use and a maintenance schedule.
Common issues and causes during initial operation.
Common issues and causes during ongoing operation.
Details electrical, performance, and physical specifications for different models.
Shows an exploded view of the basic series components.
Illustrates the components related to product packing.
Lists parts from 1 to 14 with corresponding model numbers.
Lists parts from 15 to 25 with corresponding model numbers.
Locates name plate and outlines safety rules for maintenance.
Instructions for removing the front cover and cleaning the impeller.
Steps for removing and replacing the front cover.
Detailed steps for replacing the push-button switch assembly.
Continues the process of replacing the push-button switch.
Instructions for removing and replacing the impeller.
Further steps for impeller replacement and alignment.
Steps for replacing the shaft.
Final steps for shaft replacement.
Instructions for replacing the capacitor.
Initial steps for motor replacement.
Detailed steps for removing and replacing the motor assembly.
General
