To Next PageTo Next Page
Need help?Do you have a question about the Panasonic BT-LH2550 and is the answer not in the manual?
General| Screen Size | 25 inches |
|---|---|
| Resolution | 1920 x 1200 |
| Aspect Ratio | 16:10 |
| Contrast Ratio | 1000:1 |
| Brightness | 250 cd/m² |
| Viewing Angle | 178° (H) / 178° (V) |
| Response Time | 8 ms |
| Panel Type | IPS |
| Input Connectors | HDMI, DVI |
| Output Connectors | SDI |
| Weight | 8.6 kg |
Ensures safe operation by requiring the three-pin plug to be inserted into a properly grounded outlet.
Details warnings and cautions regarding electric shock, fire hazards, and proper use of accessories.
A comprehensive list of 14 essential safety instructions for operating the apparatus.
Covers wall strength, space requirements, sunlight, temperature, and humidity for safe installation.
Identifies and describes the tally lamp, power switch, power LED, DC IN, and front panel buttons.
Explains the INPUT, MENU, and ADJUST buttons for signal selection and menu operation.
Details the cursor, ENTER, and FUNCTION buttons for menu navigation and function assignment.
Describes SDI, DVI-D, VIDEO, AUDIO IN, YPBPR/RGB, and SYNC/HD/VD input terminals.
Details GPI, RS232C control terminals and the HEADPHONES output connector.
Guides users on how to select and change settings within the main and sub-menus.
Details how to access and adjust picture/volume parameters like PHASE, CHROMA, BRIGHT, etc.
Provides a visual map of the main menu hierarchy and all available submenus and settings.
Details settings for gamma curves, color spaces (SMPTE-C, EBU, ITU-709), and color temperature adjustments.
Explains how to select color temperature and adjust gain for R, G, B components.
Covers settings for backlight, contrast, and the position of the on-screen menu.
Lists required equipment (color analyzer) and connection procedures for calibration.
Guides users on how to perform automatic calibration using the connected color analyzer.
Details how to assign specific functions (HV DELAY, GAMMA SELECT, etc.) to the FUNCTION buttons.
Explains how to enable or disable GPI functions for remote control.
Covers settings for VIDEO, FORMAT, NTSC SETUP, SDI1, and SDI2 inputs.
Details audio input selection for headphones and embedded audio channel output.
Covers settings for split-screen window sizes and sub-window input selection.
Explains how to display waveform and vector data using the WFM/VECTOR function.
Details how to use the Two Window function to display two inputs simultaneously.
Explains GPI terminal pin functions and operating conditions for remote control.
Details the RS-232C terminal pinout, connections, and communication parameters.
Provides a comprehensive list of commands for setting various monitor parameters via remote control.
Lists commands used to query the monitor's current settings and status.
Details general electrical, physical, environmental specs and display panel characteristics.
Provides a comprehensive table showing compatible signal formats for each input channel.
