Panasonic CF-27 Series

13
Operation
Operate after pressing the two buttons simultaneously.
1
2
or
Two quick taps, but on
the second tap leaving
your finger down (apply-
ing pressure) and moving
it on the work surface.
While holding down the
button, moving your fin-
ger on the work surface.
* In [Start] - [Settings] - [Control Panel] - [Mouse] - [Tap and Buttons]
or
Basic Operation
Function
Touch Pad Operation
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Scroll*
Scroll a document
(rotate the wheel)
Auto Scroll*
Automatically scroll a document
(move the mouse after clicking the
wheel)
or
Move the tip of your finger
lightly over the surface.
Wheel
Indicates an operation applicable to the Microsoft
®
IntelliMouse
TM
Wheel mode.
Indicates an operation applicable to the original mode.
Original
When a check mark is added for [use Drag
Lock] *
After the drag operation (above : left side), it is
necessary to determine the destination (i.e., loca-
tion of drop) by one tap. Under the condition no
destination is selected, do not use the suspend or
hibernation function. Nothing is shown on the dis-
play, even after resuming from the suspend or hi-
bernation mode.
In this case, the display will return after a tap or
click is made.
Wheel
Original
tapping
clicking
double-tapping
double-clicking
Wheel
Original
Wheel
Original
Wheel
Original
When releasing the auto scroll function:
One tap on the work surface.
Wheel
Wheel
Original
Wheel
Original