17
Operation
When needed, the touchscreen can be configured using the following steps.
Configuring the touchscreen
Select [Start] - [Programs] - [Touchscreen] - [Touchscreen Control].
The following screen will appear.
Set to your needs.
Advanced settings
Hardware Controls
User Controls
Button Modes
Calibrate
Use when the cursor can not be
pointed correctly with your finger.
(Needed if the alignment of the
touchscreen with the visual image
change or adjust the display resolu-
tion).
Set the hardware resources.
Match this setting with the setting
for [Base I/O] in the Setup Utility.
Set the operating modes or parameters.
Set the button modes.
Set the advanced settings.
NOTE
The touchscreen function can not be
used in [Touchscreen Control].
For more information, refer to [Help].
Click [Exit].
2
1
CAUTION
The Panasonic Hand Writing can not be used on the touchscreen.
To Next Page
Loading...
