42
Appendix
11
At the confirmation message, press Enter . The opera-
tion of erasing the hard disk will start.
(If necessary, the “hard disk data erase” operation can be
cancelled after it has begun by pressing
Ctrl + C . If the operation is cancelled before
being completed, a part of data will not be erased.)
12
After the operation is complete:
Under normal conditions, the message [Hard disk data has
been deleted.] will be displayed.
If a problem occurred during the operation, an error mes-
sage will be displayed.
13
Remove the recovery CD, and then press any key to turn
off the computer.
Hard Disk Data Erase Utility
To Next Page
Loading...
