CQ-C7205U/C7105U
English
13
Note: Adjust the clock when “ADJUST” appears on the
display.
1
Press [MENU] to display the menu
display.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
2
Press []] or [[] to display the
DISPLAY menu.
3
Turn [VOL] to select “CLOCK ADJ”.
For using the remote control, use [}] or [{].
4
Press [PUSH SEL], and the clock
adjustment screen appears.
For using the remote control, use [BAND] (SET).
5
Adjust the setting value.
[[]
:
Adjusting minutes
[]]
:
Adjusting hours
q
:
Forward
w
:
Backward
6
Press [PUSH SEL], and the menu
screen resumes.
For using the remote control, use [BAND] (SET).
7
Press [MENU] to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
You may need to set the following depending on the
devices to be connected.
Using Subwoofer
¡ Subwoofer level adjustment (a page 28)
¡ Subwoofer low pass filter (a page 28)
Note: Other settings are required when a Sirius receiver,
an XM receiver, or a Hands-Free Phone System is
connected. (a System Upgrade Guidebook)
The following functions are activated when the Security
Function is ON. (a page 29)
¡ The security indicator lights up when removing the
face plate.
¡ The alarm sounds and the message appears on the
screen to warn you to remove the face plate at ACC
off.
Security Indicator
Preparation
Security Function SettingOther SettingsClock adjustment
To Next Page
Loading...
