Panasonic CQ-VD5005U - DVD Settings: Language and Display; DVD Settings: Language and Display Options

37
38
CQ-VD5005U/L
English
Settings (continued)
Display
Display aspect and DVD software mode
: plays a video in 4:3 screen.
: plays a video in wide screen (16:9).
default:
Wide
Wide
Narrow
(Display aspect setting)
DVD Aspect
: plays wide-screen video in Pan & Scan
mode (in which the left and right edges
of the screen are cut off).
: plays wide-screen video in letterbox
mode (in which black bands appear at
the top and bottom of the screen).
default:
Note:
¡
Set the software setting according to the symbol used
on jacket. (
a
page 18)
¡
DVD software mode setting is ignored if
or is already set in the software.
¡
Screen aspect of the display unit is changed according
to the aspect ratio setting (
a
page 36) and DVD soft-
ware’s aspect.
: sets PAL in accordance with the equip-
ment connected to VIDEO OUT.
: sets NTSC in accordance with the
equipment connected to VIDEO OUT.
default:
The angle mark is displayed to indicate the parts where
multi-angle data is recorded.
: activates angle mark.
: inactivates angle mark.
default:
On
Off
On
(Angle mark setting)
Angle Mark
NTSC
NTSC
PAL
(VIDEO OUT terminal setting)
TV Type
Letter Box
Pan & Scan
Pan & Scan
Letter Box
Pan & Scan
(DVD software mode)
Letter Box
Language
Language Setting
: English
: French
: Spanish
: other language. Input the language code.
(a page 47)
default:
ENG
Other
SPA
FRA
ENG
(DVD menu language)
Menu
N
ote:
¡A disc supporting closed captioning and subtitles may
overlap each other on the screen. In this case, turn the
subtitle off.
: English
: French
: Spanish
: other language. Input the language code.
(a page 47)
default:
ENG
Other
SPA
FRA
ENG
(Subtitle language)
Subtitle
Note:
¡These adjustments being executed, playback will start
from the beginning of a disc.
: English
: French
: Spanish
: other language. Input the language code.
(a page 47)
default:
ENG
Other
SPA
FRA
ENG
(Audio language)
Audio
Radio
DVD
AudioScreenUser