B. Thermostat characteristic when switching between cooling and
heating mode operation
Switching between cooling mode and heating mode operation
is carried out as shown in the table below.
However, during automatic changeover operation, the operation
will not change within 10 minutes after the thermostat has
switched off, either cooling mode or heating mode.
(The 10 minutes timer will be cancelled when operation is
changed to other modes (manually) or when operation stops
and the thermostat turns on.)
C. Thermostat characteristics during cooling mode and heating
operation
The thermostat on/off characteristics in both operation modes
are given in the table below.
145
To Next Page
Loading...
Need help?
General
