2.1.4. Static pressure selection
- The static pressure is selectable; 5mmAq or 7mmAq. The static
pressure can be selected according to the condition of the duct.
2.1.5. Quiet operation
- The sound level is as low as 40db (A) for 2.5 HP and 3.0 HP. The
models is ideal for installation in offices, shop and houses where
quiet operation is important.
2.1.6. Auto fan mode operation
- Auto fan mode is added to existing modes Hi, Me and Lo. It
aotomatically adjusts the fan speed according to the indoor
temperature.
2.1.7. Dry mode function
- Dry mode can make a comfortable indoor environment during wet
season.
2.1.8. Automatic changeover function (heat pump models)
- The unit automatically switches between cooling and heating in
accordance with operating load in order to maintain a confortable
indoor temperature.
2.1.9. Common design for Indoor unit and Remote Control
- The indoor unit and the wire remote control are design as a
common specification between Cooling only and Heat Pump
models.
2.1.10. Wired Remote Control
To Next Page
Loading...
Need help?
General
