30 m of pipe length. This makes installation much easier.
2.3.3. Drain water dripping-prevention structure
- The base of the outdoor unit is provided with a single drain hole in
order to prevent drain water from leaking out of the unit. Body
connecting a drain elbow and a discharge pipe, water leakages
can be prevented even when the unit is installed against a wall.
2.3.4. Space saving design allows units to be installed side by side continuously
- Servicing after installation can be carried out by removing the front
covers.
2.3.5. Easy test operation
- Test operation can be carried out for both indoor and outdoor
units.
2.3.6. Long pipe design
Max piping length: 50 (m)
24BB~50BB
Height difference/
equivalent pipe length
30/50
2.3.7. Internal pipe connection
- Pipes are connected inside the units (inside the side covers),
making the final appearance more attractive.
- Pipes can be diverted outward in any of four directions (forward,
right, down, rear).
- Small liquid pipe diameters of 9.52mm for 43BB and 50BB models,
To Next Page
Loading...
