EasyManua.ls Logo

Panasonic CS-C18KKS - Page 40

Panasonic CS-C18KKS
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
Airflow direction (Horizontal, Vertical) Control
o During any operation mode combines with Patrol operation, airflow direction follows respective operation
mode.
o During Patrol individual operation if e-ion starts, only Auto Air Swing is allowed. Even if “Air Swing” button is
pressed, no signal is sent to air conditioner, and no change on LCD display.
o During Patrol individual operation if e-ion stops, Airflow direction louver closed.
LED display (Applicable to all models except KKD models)
o When Patrol operation is selected, Patrol LED illuminates.
o During Patrol individual operation, only Patrol LED illuminates. When e-ion air purifying operation starts
based on dirtiness level, Power LED, Patrol LED and e-ion LED illuminates.
PATROL LED E-ION TIMER
No Description BLUE ORANGE RED BLUE ORANGE
1 When patrol function is not selected OFF OFF OFF - -
2 During gas sensor error detection control OFF OFF Blinking OFF OFF
3 During E-ion abnormal discharge error OFF OFF OFF Blinking OFF
4 During E-ion breakdown error OFF OFF OFF Blinking Blinking
5 During Test Mode OFF OFF OFF OFF OFF
6 During stop OFF OFF OFF OFF OFF
7 2 minutes gas sensor initial stabilization time (Level 0) ON OFF OFF OFF OFF
a. Dirtiness level 0* ON OFF OFF OFF OFF
b. Dirtiness level 1 OFF ON OFF OFF OFF
c. Dirtiness level 1* OFF ON OFF ON OFF
8
During operation
During patrol
d. Dirtiness level 2 OFF OFF ON ON OFF
Remote Control Receiving Sound
o Normal Operation Î Patrol Mode : Beep
o Patrol Mode Î Stop : Long Beep
o Patrol Mode Î Normal Operation : Beep
o Stop Î Patrol : Beep
Timer Control
o When ON timer activates when unit stops, previous operation resumes and restored last saved Patrol
operation status.
o When ON timer activates during any operation, no change and carry on current operation.
o When OFF timer activates during any operation, all operation stops and the latest Patrol operation status is
saved.
Power Failure Control
o During Patrol individual operation, if power failure occurs, after power resumes, Patrol individual operation
resumes immediately.
o During combination operation, if power failure occurs, after power resumes combination operation resume
immediately.

Table of Contents

Other manuals for Panasonic CS-C18KKS

Related product manuals